Allied Telesis AlliedWare Plus - Bgp Bestpath As-Path Ignore

C613-50100-01 REV C Command Reference for x930 Series 1165
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
BGP AND BGP4+ COMMANDS
BGP
BESTPATH AS-PATH IGNORE
bgp bestpath as-path ignore
Overview This command prevents the router from considering as-path as a factor in the
algorithm for choosing a route.
The no variant of this command allows the router to consider as-path in choosing
a route.
Syntax
bgp bestpath as-path ignore
no bgp bestpath as-path ignore
Mode Router Configuration
Example
awplus# configure terminal
awplus(config)# router bgp 100
awplus(config-router)# bgp bestpath as-path ignore
Related
Commands
bgp always-compare-med
bgp bestpath med
bgp bestpath compare-routerid