C613-50100-01 REV C Command Reference for x930 Series 795
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
DOMAIN NAME SERVICE (DNS) COMMANDS
SHOW
DEBUGGING IP DNS FORWARDING
show debugging ip dns forwarding
Overview Use this command to display the DNS Relay debugging status. DNS Relay
debugging is set using the debug ip dns forwarding command.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Syntax
show debugging ip dns forwarding
Mode User Exec and Privileged Exec
Example To display the DNS Relay debugging status, use the command:
awplus# show debugging ip dns forwarding
Output Figure 21-1: Example output from the show debugging ip dns forwarding
command
Related
Commands
debug ip dns forwarding
awplus#show debugging ip dns forwarding
DNS Relay debugging status:
debugging is on
To Next Page
Loading...
Need help?
General
