C613-50100-01 REV C Command Reference for x930 Series 969
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
OSPF COMMANDS
DEBUG
OSPF EVENTS
debug ospf events
Overview This command enables OSPF debugging for OSPF event troubleshooting.
To enable all debugging options, specify debug ospf event with no additional
parameters.
The no and undebug variant of this command disable OSPF debugging. Use this
command without parameters to disable all the options.
Syntax
debug ospf events [abr] [asbr] [lsa] [nssa] [os] [router]
[vlink]
no debug ospf events [abr] [asbr] [lsa] [nssa] [os] [router]
[vlink]
Mode Privileged Exec and Global Configuration
Example
awplus# debug ospf events asbr lsa
Related
Commands
terminal monitor
undebug ospf events
Parameter Description
abr Shows ABR events.
asbr Shows ASBR events.
lsa Shows LSA events.
nssa Shows NSSA events.
os Shows OS interaction events.
router Shows other router events.
vlink Shows virtual link events.
To Next Page
Loading...
Need help?
General
