C613-50100-01 REV C Command Reference for x930 Series 2391
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
DHCP SNOOPING COMMANDS
SHOW
DEBUGGING IP DHCP SNOOPING
show debugging ip dhcp snooping
Overview Use this command to display the DHCP snooping debugging configuration.
Syntax
show debugging ip dhcp snooping
Mode User Exec and Privileged Exec
Example To display the DHCP snooping debugging configuration, use the command:
awplus# show debugging ip dhcp snooping
Related
Commands
debug ip dhcp snooping
show log
Table 9: Example output from the show debugging ip dhcp snooping
command
awplus# show debugging ip dhcp snooping
DHCP snooping debugging status:
DHCP snooping debugging is off
DHCP snooping all debugging is off
DHCP snooping acl debugging is off
DHCP snooping binding DB debugging is off
DHCP snooping packet debugging is off
DHCP snooping detailed packet debugging is off
To Next Page
Loading...
Need help?
General
