Allied Telesis AlliedWare Plus - Show Ip Vrf Detail

C613-50100-01 REV C Command Reference for x930 Series 1574
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
VRF LITE COMMANDS
SHOW
IP VRF DETAIL
show ip vrf detail
Overview This command displays the detailed configuration for a specific VRF instance.
Syntax
show ip vrf detail <vrf-name>
Mode User Exec and Privileged Exec
Example To display the detailed information for all VRF instances, use the command:
awplus# show ip vrf detail
Output Figure 30-19: Example output from the show ip detail command, for all VRF
instances
Related
Commands
show ip vrf
Parameter Description
<vrf-name> The name of the VRF instance.
VRF blue; Description: VRF for customer blue
FIB ID 3; Router ID: 192.168.30.1 (automatic)
Default RD 500:3
Interfaces:
lo3, vlan3
Export route-target communities
RT: 500:3
Import route-target communities
RT: 500:4
Import route-map: blue45
No export route-map

VRF red
FIB ID 1; Router ID: 192.168.10.1 (automatic)
Default RD 500:1
Interfaces:
lo1, vlan1
Export route-target communities
RT: 500:1
Import route-target communities
RT: 500:1
Import route-map: red43
No export route-map