Allied Telesis AlliedWare Plus - Show Running-Config Trigger

C613-50100-01 REV C Command Reference for x930 Series 3010
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
TRIGGER COMMANDS
SHOW
RUNNING-CONFIG TRIGGER
show running-config trigger
Overview This command displays the current running configuration of the trigger utility.
Syntax
show running-config trigger
Mode Privileged Exec
Example To display the current configuration of the trigger utility, use the command:
awplus# show running-config trigger
Output Figure 63-2: Example output from the show running-config trigger command
Related
Commands
show trigger

trigger 1
type card in
trigger 2
type card out
!