C613-50100-01 REV C Command Reference for x930 Series 356
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
LOGGING COMMANDS
LOG
EMAIL
log email
Overview This command configures the device to send log messages to an email address.
The email address is specified in this command.
Syntax
log email <email-address>
Default By default no filters are defined for email log targets. Filters must be defined before
messages will be sent.
Mode Global Configuration
Example To have log messages emailed to the email address
admin@alliedtelesis.com use the following commands:
awplus# configure terminal
awplus(config)# log email admin@alliedtelesis.com
Related
Commands
default log email
log email (filter)
log email exclude
log email time
show log config
Parameter Description
<email-address> The email address to send log messages to
To Next Page
Loading...
