C613-50100-01 REV C Command Reference for x930 Series 2838
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
SNMP COMMANDS
SHOW
SNMP-SERVER COMMUNITY
show snmp-server community
Overview This command displays the SNMP server communities configured on the device.
SNMP communities are specific to v1 and v2c.
Syntax
show snmp-server community
Mode Privileged Exec
Example To display the SNMP server communities, use the command:
awplus# show snmp-server community
Output Figure 58-5: Example output from the show snmp-server community
command
Related
Commands
show snmp-server
snmp-server community
SNMP community information:
Community Name ........... public
Access ................. Read-only
View ................... none
To Next Page
Loading...
Need help?
General
