C613-50100-01 REV C Command Reference for x930 Series 365
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
LOGGING COMMANDS
LOG
FACILITY
log facility
Overview Use this command to specify an outgoing syslog facility. This determines where
the syslog server will store the log messages.
Use the no variant of this command to remove the facility.
Syntax
log facility
{kern|user|mail|daemon|auth|syslog|lpr|news|uucp|cron|authpriv
|ftp|local0|local1|local2|local3|local4|local5|local6|local7}
no log facility
Default None (the outgoing syslog facility depends on the log message)
Mode Global Configuration
Parameter Description
kern Kernel messages
user User-level messages
mail Mail system
daemon System daemons
auth Security/authorization messages
syslog Messages generated internally by the syslog daemon
lpr Line printer subsystem
news Network news subsystem
uucp UNIX-to-UNIX Copy Program subsystem
cron Clock daemon
authpriv Security/authorization (private) messages
ftp FTP daemon
local0 Local use 0
local1 Local use 1
local2 Local use 2
local3 Local use 3
local4 Local use 4
local5 Local use 5
local6 Local use 6
local7 Local use 7
To Next Page
Loading...
Need help?
General
