C613-50100-01 REV C Command Reference for x930 Series 1848
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
PIM-DM COMMANDS
SHOW
DEBUGGING PIM DENSE-MODE
show debugging pim dense-mode
Overview This command displays the status of the debugging of the system.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Syntax
show debugging pim dense-mode
Mode User Exec and Privileged Exec
Output Figure 36-2: Example output from the show debugging pim dense-mode
command
Related
Commands
debug pim dense-mode all
PIM-DM Debugging status:
PIM-DM VR-VRF Context debugging is off
PIM-DM Decoder debugging is off
PIM-DM Encoder debugging is off
PIM-DM FSM debugging is off
PIM-DM MRT debugging is off
PIM-DM NHOP debugging is off
PIM-DM NSM debugging is off
PIM-DM VIF debugging is off
To Next Page
Loading...
Need help?
General
