C613-50100-01 REV C Command Reference for x930 Series 1412
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
BGP AND BGP4+ COMMANDS
SHOW
IP BGP NEIGHBORS OPEN (BGP ONLY)
show ip bgp neighbors open (BGP only)
Overview Use this command to display the number of open messages sent to the neighbor
from the peer throughout the session.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Syntax
show ip bgp neighbors <ipv4-addr> open
Mode User Exec and Privileged Exec
Example
awplus# show ip bgp neighbors 10.11.4.26 open
Parameter Description
<ipv4-addr> The IPv4 address of an IPv4 BGP neighbor, in dotted decimal
notation A.B.C.D.
To Next Page
Loading...
Need help?
General
