C613-50100-01 REV C Command Reference for x930 Series 782
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
DOMAIN NAME SERVICE (DNS) COMMANDS
DEBUG
IP DNS FORWARDING
debug ip dns forwarding
Overview Use this command to enable DNS Relay debugging.
Use the no variant of this command to disable DNS Relay debugging.
Syntax
debug ip dns forwarding
no debug ip dns forwarding
Default DNS Relay debugging is disabled by default.
Mode Privileged Exec
Examples To enable DNS forwarding debugging, use the commands:
awplus# debug ip dns forwarding
To disable DNS forwarding debugging, use the commands:
awplus# no debug ip dns forwarding
Related
Commands
ip dns forwarding
show debugging ip dns forwarding
To Next Page
Loading...
