Allied Telesis AlliedWare Plus - Maximum-Area

C613-50100-01 REV C Command Reference for x930 Series 1002
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
OSPF COMMANDS
MAXIMUM
-AREA
maximum-area
Overview Use this command to set the maximum number of OSPF areas.
Use the no variant of this command to set the maximum number of OSPF areas to
the default.
Syntax
maximum-area <1-4294967294>
no maximum-area
Default The default for the maximum number of OSPF areas is 4294967294.
Mode Router Configuration
Usage Use this command in router OSPF mode to specify the maximum number of OSPF
areas.
Examples The following example sets the maximum number of OSPF areas to 2:
awplus# configure terminal
awplus(config)# router ospf 100
awplus(config-router)# maximum-area 2
The following example removes the maximum number of OSPF areas and resets to
default:
awplus# configure terminal
awplus(config)# router ospf 100
awplus(config-router)# no maximum-area
Parameter Description
<1-4294967294> Specify the maximum number of OSPF areas.