C613-50100-01 REV C Command Reference for x930 Series 893
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
RIP COMMANDS
KEY
CHAIN
key chain
Overview Use this command to enter the key chain management mode and to configure a
key chain with a key chain name.
Use the no variant of this command to remove the key chain and all configured
keys.
Syntax
key chain <key-chain-name>
no key chain <key-chain-name>
Mode Global Configuration
Usage This command allows you to enter the keychain mode from which you can specify
keys on this key chain.
Example The following example shows the creation of a key chain named mychain and the
change into keychain mode prompt.
awplus# configure terminal
awplus(config)# key chain mychain
awplus(config-keychain)#
Related
Commands
key
key-string
accept-lifetime
send-lifetime
Parameter Description
<key-chain-name> Specify the name of the key chain to manage.
To Next Page
Loading...
Need help?
General
