53
C613-50100-01 REV C Command Reference for x930 Series 2506
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Ethernet Protection
Switched Ring
(EPSRing™)
Commands
Introduction
Overview This chapter provides an alphabetical reference for commands used to configure
Ethernet Protection Switched Ring (EPSRing™). For more information, see the EPSR
Feature Overview and Configuration Guide.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Command List •“debug epsr” on page 2508
•“epsr” on page 2509
•“epsr configuration” on page 2511
•“epsr datavlan” on page 2512
•“epsr enhancedrecovery enable” on page 2513
•“epsr mode master controlvlan primary port” on page 2514
•“epsr mode transit controlvlan” on page 2515
•“epsr priority” on page 2516
•“epsr state” on page 2517
•“epsr trap” on page 2518
•“show debugging epsr” on page 2519
•“show epsr” on page 2520
•“show epsr common segments” on page 2525
•“show epsr config-check” on page 2526
•“show epsr <epsr-instance>” on page 2527
•“show epsr <epsr-instance> counters” on page 2528
•“show epsr counters” on page 2529
•“show epsr summary” on page 2530
To Next Page
Loading...
Need help?
General
