Allied Telesis AlliedWare Plus - Show Reboot History

C613-50100-01 REV C Command Reference for x930 Series 284
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
SYSTEM CONFIGURATION AND MONITORING COMMANDS
SHOW
REBOOT HISTORY
show reboot history
Overview Use this command to display the device’s reboot history.
Syntax
show reboot history [<stack-ID>]
Mode User Exec and Privileged Exec
Example To show the reboot history of stack member 2, use the command:
awplus# show reboot history 2
Output Figure 7-15: Example output from the show reboot history command
Parameter Description
<stack-ID> Stack member number, from 1 to 8.
awplus#show reboot history 2

Stack member 2:

<date> <time> <type> <description>
-----------------------------------------------
2016-10-10 01:42:04 Expected User Request
2016-10-10 01:35:31 Expected User Request
2016-10-10 01:16:25 Unexpected Rebooting due to critical process (network/nsm) 
failure!
2016-10-10 01:11:04 Unexpected Rebooting due to critical process (network/nsm) 
failure!
2016-10-09 20:46:40 Unexpected Rebooting due to VCS duplicate member-ID
2016-10-09 19:56:16 Expected User Request
2016-10-09 20:36:06 Unexpected Rebooting due to VCS duplicate master (Continuous 
reboot prevention)
2016-10-09 19:51:20 Expected User Request
Table 6: Parameters in the output from the show reboot history command
Parameter Description
Unexpected A non-intended reboot.
The reboot is counted by the continuous reboot
prevention feature, as long as the reboot occurred in the
time period specified for continuous reboot prevention.
Expected A planned or user-triggered reboot.
The reboot is not counted by the continuous reboot
prevention feature.