C613-50100-01 REV C Command Reference for x930 Series 1391
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
BGP AND BGP4+ COMMANDS
SHOW
DEBUGGING BGP (BGP ONLY)
show debugging bgp (BGP only)
Overview Use this command to display the BGP debugging option set.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Syntax
show debugging bgp
Mode User Exec and Privileged Exec
Example
awplus# show debugging bgp
Output Figure 28-6: Example output from the show debugging bgp command
Related
Commands
debug bgp (BGP only)
BGP debugging status:
BGP debugging is on
BGP events debugging is on
BGP updates debugging is on
BGP fsm debugging is on
To Next Page
Loading...
Need help?
General
