C613-50100-01 REV C Command Reference for x930 Series 1852
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
PIM-DM COMMANDS
SHOW
IP PIM DENSE-MODE MROUTE
show ip pim dense-mode mroute
Overview This command displays the IP PIM-DM multicast routing table.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Syntax
show ip pim dense-mode mroute
Mode User Exec and Privileged Exec
Example
awplus# show ip pim dense-mode mroute
Output Figure 36-4: Example output from the show ip pim dense-mode mroute
command
PIM-DM Multicast Routing Table
(192.168.10.52, 224.1.1.1)
Source directly connected on vlan3
State-Refresh Originator State: Originator
Upstream IF: vlan3, State: Forwarding
Downstream IF List:
vlan2, in 'olist':
Downstream State: NoInfo
Assert State: NoInfo
To Next Page
Loading...
Need help?
General
