C613-50100-01 REV C Command Reference for x930 Series 111
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
CLI NAVIGATION COMMANDS
HELP
help
Overview This command displays a description of the AlliedWare Plus™ OS help system.
Syntax
help
Mode All command modes
Example To display a description on how to use the system help, use the command:
awplus# help
Output Figure 1-1: Example output from the help command
When you need help at the command line, press '?'.
If nothing matches, the help list will be empty. Delete
characters until entering a '?' shows the available options.
Enter '?' after a complete parameter to show remaining valid
command parameters (e.g. 'show ?').
Enter '?' after part of a parameter to show parameters that
complete the typed letters (e.g. 'show ip?').
To Next Page
Loading...
Need help?
General
