C613-50100-01 REV C Command Reference for x930 Series 1854
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
PIM-DM COMMANDS
SHOW
IP PIM DENSE-MODE NEIGHBOR DETAIL
show ip pim dense-mode neighbor detail
Overview This command displays detailed PIM-DM neighbor information.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Syntax
show ip pim dense-mode neighbor detail
Mode User Exec and Privileged Exec
Example
awplus# show ip pim dense-mode neighbor detail
Output Figure 36-6: Example output from the show ip pim dense-mode neighbor
detail command
Neighbor 192.168.1.152 (vlan2)
Up since 17:16:20, Expires in 00:01:20
Neighbor 192.168.1.149 (vlan2)
Up since 17:16:12, Expires in 00:01:26
To Next Page
Loading...
