C613-50100-01 REV C Command Reference for x930 Series 2247
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
AAA COMMANDS
SHOW
DEBUGGING AAA
show debugging aaa
Overview This command displays the current debugging status for AAA (Authentication,
Authorization, Accounting).
Syntax
show debugging aaa
Mode User Exec and Privileged Exec
Example To display the current debugging status of AAA, use the command:
awplus# show debug aaa
Output Figure 44-3: Example output from the show debug aaa command
AAA debugging status:
Authentication debugging is on
Accounting debugging is off
To Next Page
Loading...
Need help?
General
