Allied Telesis AlliedWare Plus - Show Ip Vrf Interface

C613-50100-01 REV C Command Reference for x930 Series 1575
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
VRF LITE COMMANDS
SHOW
IP VRF INTERFACE
show ip vrf interface
Overview This command displays protocol, operational status, and address information, for
interfaces existing within either a specified VRF instance, or all VRF instances.
Syntax
show ip vrf interface <vrf-name>
Mode User Exec and Privileged Exec
Example To display all interfaces and IP addresses associated with all VRF instances, use the
command:
awplus# show ip vrf interface
Output Figure 30-20: Example output from the show ip vrf interface command
Example To display all interfaces and IP addresses associated with the VRF instance red, use
the command:
awplus# show ip vrf interface red
Output Figure 30-21: Example output from the show ip vrf interface red command
Related
Commands
show ip vrf
Parameter Description
<vrf-name> The name of the VRF instance.
Interface IP-Address Status Protocol Vrf
lo1 unassigned admin up running red
lo2 unassigned admin up running green
vlan1 192.168.10.1/24 admin up running red
vlan2 192.168.20.1/24 admin up running green
Interface IP-Address Status Protocol Vrf
lo1 unassigned admin up running red
vlan1 192.168.10.1/24 admin up running red