48
C613-50100-01 REV C Command Reference for x930 Series 2351
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
TACACS+
Commands
Introduction
Overview This chapter provides an alphabetical reference for commands used to configure
the device to use TACACS+ servers. For more information about TACACS+, see the
TACACS+ Feature Overview and Configuration Guide.
Command List •“show tacacs+” on page 2352
•“tacacs-server host” on page 2353
•“tacacs-server key” on page 2355
•“tacacs-server timeout” on page 2356