Allied Telesis AlliedWare Plus - Undebug All Pim Dense-Mode

C613-50100-01 REV C Command Reference for x930 Series 1856
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
PIM-DM COMMANDS
UNDEBUG
ALL PIM DENSE-MODE
undebug all pim dense-mode
Overview Use this command from the Global Configuration mode to disable all PIM-DM
debugging.
Syntax
undebug all pim dense-mode
Mode Global Configuration
Example
awplus# configure terminal
awplus(config)# undebug all pim dense-mode
Related
Commands
debug pim dense-mode all
debug pim dense-mode context
debug pim dense-mode decode
debug pim dense-mode encode
debug pim dense-mode fsm
debug pim dense-mode mrt
debug pim dense-mode nexthop
debug pim dense-mode nsm
debug pim dense-mode vif