C613-50100-01 REV C Command Reference for x930 Series 1637
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
IGMP AND IGMP SNOOPING COMMANDS
SHOW
IP IGMP PROXY
show ip igmp proxy
Overview Use this command to display the state of IGMP Proxy services for a specified
interface or for all interfaces.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Syntax
show ip igmp proxy
show ip igmp proxy groups [detail]
show ip igmp proxy groups <multicast-group> [detail]
show ip igmp proxy groups <vlan> [detail]
show ip igmp proxy groups <vlan> <multicast-group> [detail]
Mode User Exec and Privileged Exec
Example To display the state of IGMP Proxy services for all interfaces, enter the command:
awplus# show ip igmp proxy
To display the state of IGMP Proxy services for VLAN interface vlan1, enter the
command:
awplus# show ip igmp proxy groups vlan1
To display the detailed state of IGMP Proxy services for VLAN interface vlan1, enter
the command:
awplus# show ip igmp proxy groups vlan1 detail
Related
Commands
ip igmp proxy-service
Parameter Description
groups Specify IGMP proxy group membership information.
detail Specify detailed IGMPv3 source information.
<vlan> Specify the name of a single VLAN interface, for example vlan1.
<multicast-
group>
Specify the IPv4 address in of the multicast group, in the format
A.B.C.D.
To Next Page
Loading...
Need help?
General
