C613-50100-01 REV C Command Reference for x930 Series 225
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
GUI COMMANDS
SERVICE
HTTP
service http
Overview Use this command to enable the HTTP (Hypertext Transfer Protocol) service. This
service, which is enabled by default, is required to support the AlliedWare Plus™
GUI Java applet on a Java enabled browser.
Use the no variant of this command to disable the HTTP feature.
Syntax
service http
no service http
Default Enabled
Mode Global Configuration
Example To enable the HTTP service, use the following commands:
awplus# configure terminal
awplus(config)# service http
To disable the HTTP service, use the following commands:
awplus# configure terminal
awplus(config)# no service http
Validation
Commands
show running-config