C613-50100-01 REV C Command Reference for x930 Series 1211
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
BGP AND BGP4+ COMMANDS
CLEAR
IP BGP DAMPENING (BGP ONLY)
clear ip bgp dampening (BGP only)
Overview Use this command to clear route dampening information and unsuppress routes
that have been suppressed.
Syntax
clear ip bgp dampening [<ip-address>|<ip-address/m>]
Mode Privileged Exec
Examples
awplus# clear ip bgp dampening 10.10.0.121
Parameter Description
<ip-address> Specifies the IPv4 address for which BGP dampening is to be
cleared, in dotted decimal format.
<ip-address/m> Specifies the IPv4 address with mask for which BGP dampening
is to be cleared, entered in the form A.B.C.D/M. Where M is the
subnet mask
ipv4 Clears all IPv4 address family peers. Configure parameters
relating to the BGP exchange of IPv4 prefixes.
To Next Page
Loading...
Need help?
General
