C613-50100-01 REV C Command Reference for x930 Series 1020
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
OSPF COMMANDS
SHOW
DEBUGGING OSPF
show debugging ospf
Overview Use this command to display which OSPF debugging options are currently
enabled.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Syntax
show debugging ospf
Mode User Exec and Privileged Exec
Example
awplus# show debugging ospf
Output Figure 26-2: Example output from the show debugging ospf command
OSPF debugging status:
OSPF packet Link State Update debugging is on
OSPF all events debugging is on
To Next Page
Loading...
