C613-50100-01 REV C Command Reference for x930 Series 2676
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
ALLIED TELESIS MANAGEMENT FRAMEWORK™ (AMF) COMMANDS
SHOW
DEBUGGING ATMF
show debugging atmf
Overview This command shows the debugging modes status for AMF.
Syntax
show debugging atmf
Mode User Exec and Global Configuration
Example To display the AMF debugging status, use the command:
node_1# show debugging atmf
Figure 54-18: Sample output from the show debugging atmf command.
Related
Commands
debug atmf packet
node1# show debugging atmf
ATMF debugging status:
ATMF arealink debugging is on
ATMF link debugging is on
ATMF crosslink debugging is on
ATMF database debugging is on
ATMF neighbor debugging is on
ATMF packet debugging is on
ATMF error debugging is on
To Next Page
Loading...
Need help?
General
