C613-50100-01 REV C Command Reference for x930 Series 2426
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
VIRTUAL CHASSIS STACKING (VCSTACK™) COMMANDS
DEBUG
STACK
debug stack
Overview This command enables the stacking debugging facilities.
Syntax
debug stack [link|topology|trace]
no debug stack [link|topology|trace]
Default Stack trace debugging is enabled.
Mode Privileged Exec and Global Configuration
Usage The command displays debug information about the stacked devices. If no
parameter is specified, all the stack debugging information will be displayed,
including link events, topology discovery messages and all notable stacking
events. If link parameter is specified, only the link events debugging information
will be displayed.
Examples To enable debugging, enter the following command on the stack master:
awplus# debug stack
To enable link debugging, enter the following command on the stack master:
awplus# debug stack link
To enable topology discovery debugging, enter the following command on the
stack master:
awplus# debug stack topology
To enable stack trace debugging, enter the following command on the stack
master:
awplus# debug stack trace
Related
Commands
undebug stack
Parameter Description
link Stacking neighbor discovery events on stack links.
topology Stacking topology discovery messages.
trace Notable stacking events.
To Next Page
Loading...
Need help?
General
