C613-50100-01 REV C Command Reference for x930 Series 764
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
IP ADDRESSING AND PROTOCOL COMMANDS
SHOW
IP IRDP INTERFACE
show ip irdp interface
Overview This command displays the configuration of IRDP on all interfaces, or for a specified
interface.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Syntax
show ip irdp interface [<interface-name>]
Mode User Exec and Privileged Exec
Example To display the IRDP configuration for vlan4, use the command:
awplus# show ip irdp interface vlan4
Output Figure 20-13: Example output from the show ip irdp interface command
Parameter Description
<interface-
name>
Displays the interface status and configuration details of the
specified interface.
vlan13 is up, line protocol is up
ICMP Router Discovery Protocol
Sending mode multicast
Router Lifetime 1350 seconds
Default Preference 0
Min Adv Interval 450 seconds
Max Adv Interval 600 seconds
Next advertisement in 551 seconds
Non default prefix preferences
192.168.1.1 preference 25000
In packets 0 Out packets 3
In bad packets 0 Out bad packets 0
In good packets 0 Out good packets 3
In ignored packets 0
To Next Page
Loading...
Need help?
General
