C613-50100-01 REV C Command Reference for x930 Series 447
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
SWITCHING COMMANDS
CLEAR
LOOP-PROTECTION COUNTERS
clear loop-protection counters
Overview Use this command to clear the counters for the Loop Protection counters.
Syntax
clear loop-protection [interface <port-list>] counters
Mode Privileged Exec
Examples To clear the counter information for all interfaces:
awplus# clear loop-protection counters
To clear the counter information for a single port:
awplus# clear loop-protection interface port1.0.1 counters
Parameters Description
interface The interface whose counters are to be cleared.
<port-list> A port, a port range, or an aggregated link.
To Next Page
Loading...
