C613-50100-01 REV C Command Reference for x930 Series 2836
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
SNMP COMMANDS
SHOW
RUNNING-CONFIG SNMP
show running-config snmp
Overview This command displays the current configuration of SNMP on your device.
Syntax
show running-config snmp
Mode Privileged Exec
Example To display the current configuration of SNMP on your device, use the command:
awplus# show running-config snmp
Output Figure 58-3: Example output from the show running-config snmp command
Related
Commands
show snmp-server
snmp-server contact AlliedTelesis
snmp-server location Philippines
snmp-server group grou1 auth read view1 write view1 notify view1
snmp-server view view1 1 included
snmp-server community public
snmp-server user user1 group1 auth md5 password priv des
password
To Next Page
Loading...
Need help?
General
