C613-50100-01 REV C Command Reference for x930 Series 2272
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
RADIUS COMMANDS
SHOW
RADIUS STATISTICS
show radius statistics
Overview This command shows the RADIUS client statistics for the device.
Syntax
show radius statistics
Mode User Exec and Privileged Exec
Example See the sample output below showing RADIUS client statistics and RADIUS
configuration:
awplus# show radius statistics
Output Figure 45-4: Example output from the show radius statistics command:
RADIUS statistics for Server: 150.87.18.89
Access-Request Tx : 5 - Retransmit : 0
Access-Accept Rx : 1 - Access-Reject Rx : 2
Access-Challenge Rx : 2
Unknown Type : 0 - Bad Authenticator : 0
Malformed Access-Resp : 0 - Wrong Identifier : 0
Bad Attribute : 0 - Packet Dropped : 0
TimeOut : 0 - Dead count : 0
Pending Request : 0
To Next Page
Loading...
Need help?
General
