C613-50100-01 REV C Command Reference for x930 Series 1927
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
IPV4 SOFTWARE ACCESS CONTROL LIST (ACL) COMMANDS
CLEAR
IP PREFIX-LIST
clear ip prefix-list
Overview Use this command to reset the hit count to zero in the prefix-list entries.
Syntax
clear ip prefix-list [<list-name>] [<ip-address>/<mask>]
Mode Privileged Exec
Example To clear a prefix-list named List1:
awplus# clear ip prefix-list List1
Parameter Description
<list-name> The name of the prefix-list.
<ip-address>/<mask> The IP prefix and length.
To Next Page
Loading...
Need help?
General
