C613-50100-01 REV C Command Reference for x930 Series 2962
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
SECURE SHELL (SSH) COMMANDS
DEBUG
SSH CLIENT
debug ssh client
Overview This command enables the SSH client debugging facility. When enabled, any SSH,
SCP and SFTP client sessions send diagnostic messages to the login terminal.
The no variant of this command disables the SSH client debugging facility. This
stops the SSH client from generating diagnostic debugging message.
Syntax
debug ssh client [brief|full]
no debug ssh client
Default SSH client debugging is disabled by default.
Mode Privileged Exec and Global Configuration
Examples To start SSH client debugging, use the command:
awplus# debug ssh client
To start SSH client debugging with extended output, use the command:
awplus# debug ssh client full
To disable SSH client debugging, use the command:
awplus# no debug ssh client
Related
Commands
debug ssh server
show ssh client
undebug ssh client
Parameter Description
brief Enables brief debug mode.
full Enables full debug mode.
To Next Page
Loading...
Need help?
General
