Allied Telesis AlliedWare Plus - Epsr State

C613-50100-01 REV C Command Reference for x930 Series 2517
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
ETHERNET PROTECTION SWITCHED RING (EPSRING™) COMMANDS
EPSR
STATE
epsr state
Overview This command enables or disables an EPSR instance.
Syntax
epsr <epsr-instance> state {enabled|disabled}
Mode EPSR Configuration
Example To enable the EPSR instance called blue, use the command:
awplus(config-epsr)# epsr blue state enabled
Related
Commands
epsr mode master controlvlan primary port
epsr mode transit controlvlan
Parameter Description
<epsr-instance> The name of the EPSR instance.
state The operational state of the ring.
enabled EPSR instance is enabled.
disabled EPSR instance is disabled.