C613-50100-01 REV C Command Reference for x930 Series 2649
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
ALLIED TELESIS MANAGEMENT FRAMEWORK™ (AMF) COMMANDS
SHOW
ATMF LINKS
show atmf links
Overview This command displays information about AMF links on a switch. The display
output contains link status state information.
Syntax
show atmf links brief
Mode User Exec and Privileged Exec
Example 1 To display a brief summary of the AMF links, use the following command:
node-1# show atmf links brief
The following example summarizes the links that are detailed in the example in
show atmf links.
Figure 54-12: Sample output from the show atmf links brief command
Parameter Description
links AMF links.
brief A brief summary of AMF links, their configuration and status.
detail A detailed description of the AMF links.
statistics AMF statistics.
ifrange Limits the display output to the specified interface range.
Example-core# show atmf links
ATMF Link Brief Information:
Local Link Link ATMF Adjacent Adjacent Link
Port Type Status State Node Ifindex State
----------------------------------------------------------------------------
1.0.10 Crosslink Down Init *crosslink1 - Blocking
1.0.14 Crosslink Down Init *crosslink2 - Blocking
1.0.1 Downlink Down Init - - Blocking
1.0.2 Downlink Up Full Node2 5001 Forwarding
1.0.8 Downlink Up Full downlink1 5001 Forwarding
* = Provisioned.
To Next Page
Loading...
Need help?
General
