C613-50100-01 REV C Command Reference for x930 Series 703
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
GVRP COMMANDS
SHOW
GVRP TIMER
show gvrp timer
Overview Use this command to display data for the GVRP timers set with the gvrp timer
command.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Syntax
show gvrp timer <interface>
Mode User Exec and Privileged Exec
Examples To show the GVRP timers for all switchport interfaces, enter the command:
awplus# show gvrp timer
To show the GVRP timers for switchport interface port1.0.1, enter the
command:
awplus# show gvrp timer port1.0.1
Output The following show output displays data for timers on the switchport interface
port1.0.1
Related
Commands
gvrp timer
Parameter Description
<interface> The name of the switchport interface.
awplus# show gvrp timer port1.0.1
Timer Timer Value (centiseconds)
------------------------------------------
Join 20
Leave 60
Leave All 1000
To Next Page
Loading...
Need help?
General
