Allied Telesis AlliedWare Plus - Show Spanning-Tree Vlan Range-Index

C613-50100-01 REV C Command Reference for x930 Series 596
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
SPANNING TREE COMMANDS
SHOW
SPANNING-TREE VLAN RANGE-INDEX
show spanning-tree vlan range-index
Overview Use this command to display information about MST (Multiple Spanning Tree)
instances and the VLANs associated with them including the VLAN range-index
value for the device.
Syntax
show spanning-tree vlan range-index
Mode Privileged Exec
Example To display information about MST instances and the VLANs associated with them
for the device, including the VLAN range-index value, use the following command:
awplus# show spanning-tree vlan range-index
Output Figure 16-17: Example output from show spanning-tree vlan range-index
Related
Commands
show spanning-tree statistics
awplus#show spanning-tree vlan range-index
% MST Instance VLAN RangeIdx
% 1 1 1%