C613-50100-01 REV C Command Reference for x930 Series 915
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
RIP COMMANDS
SHOW
IP RIP INTERFACE
show ip rip interface
Overview Use this command to display information about the RIP interfaces. You can specify
an interface name to display information about a specific interface.
Syntax
show ip rip interface [<interface>]
Mode User Exec and Privileged Exec
Example
awplus# show ip rip interface
Parameter Description
<interface> The interface to display information about. For instance: vlan2.
To Next Page
Loading...
