C613-50100-01 REV C Command Reference for x930 Series 869
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
RIP COMMANDS
DEBUG
RIP
debug rip
Overview Use this command to specify the options for the displayed debugging information
for RIP events and RIP packets.
Use the no variant of this command to disable the specified debug option.
Syntax
debug rip {events|nsm|<packet>|all}
no debug rip {events|nsm|<packet>|all}
Default Disabled
Mode Privileged Exec and Global Configuration
Example The following example displays information about the RIP packets that are
received and sent out from the device.
awplus# debug rip packet
Related
Commands
undebug rip
Parameter Description
events RIP events debug information is displayed.
nsm RIP and NSM communication is displayed.
<packet> packet [recv|send] [detail] Specifies RIP packets only.
recv Specifies that information for received packets be displayed.
send Specifies that information for sent packets be displayed.
detail Displays detailed information for the sent or received packet.
all Displays all RIP debug information.
To Next Page
Loading...
Need help?
General
