16
C613-50100-01 REV C Command Reference for x930 Series 559
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Spanning Tree
Commands
Introduction
Overview This chapter provides an alphabetical reference for commands used to configure
RSTP, STP or MSTP. For information about spanning trees, including configuration
procedures, see the STP Feature Overview and Configuration Guide.
Command List •“clear spanning-tree statistics” on page 561
•“clear spanning-tree detected protocols (RSTP and MSTP)” on page 562
•“debug mstp (RSTP and STP)” on page 563
•“instance priority (MSTP)” on page 567
•“instance vlan (MSTP)” on page 569
•“region (MSTP)” on page 571
•“revision (MSTP)” on page 572
•“show debugging mstp” on page 573
•“show spanning-tree” on page 574
•“show spanning-tree brief” on page 577
•“show spanning-tree mst” on page 578
•“show spanning-tree mst config” on page 579
•“show spanning-tree mst detail” on page 580
•“show spanning-tree mst detail interface” on page 582
•“show spanning-tree mst instance” on page 584
•“show spanning-tree mst instance interface” on page 585
•“show spanning-tree mst interface” on page 586
•“show spanning-tree mst detail interface” on page 587
•“show spanning-tree statistics” on page 589
To Next Page
Loading...
Need help?
General
