C613-50100-01 REV C Command Reference for x930 Series 1425
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
BGP AND BGP4+ COMMANDS
SHOW
IP COMMUNITY-LIST
show ip community-list
Overview Use this command to display routes that match a specified community-list name
or number.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Syntax
show ip community-list [<listnumber>|<listname>]
Mode User Exec and Privileged Exec
Examples
awplus# show ip community-list mylist
awplus# show ip community-list 99
Related
Commands
ip community-list
ip community-list expanded
ip community-list standard
Parameter Description
<listnumber> Specifies the community list number in the range <1-199>
as specified by a previously issued ip community-list
command.
<listname> Specifies the community list name as specified by a previously
issued ip community-list command.
To Next Page
Loading...
Need help?
General
