C613-50100-01 REV C Command Reference for x930 Series 1762
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
PIM-SM COMMANDS
SHOW
IP PIM SPARSE-MODE RP MAPPING
show ip pim sparse-mode rp mapping
Overview Use this command to show group-to-RP (Rendezvous Point) mappings, and the RP
set.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Syntax
show ip pim sparse-mode rp mapping
Mode User Exec and Privileged Exec
Example
awplus# show ip pim sparse-mode rp mapping
Figure 34-12: Output from the show ip pim sparse-mode rp mapping
command
Related
Commands
show ip pim sparse-mode rp-hash
PIM Group-to-RP Mappings
Group(s): 224.0.0.0/4
RP: 10.10.0.9
Info source: 10.10.0.9, via bootstrap, priority 192
Uptime: 16:52:39, expires: 00:02:50
To Next Page
Loading...
Need help?
General
