C613-50100-01 REV C Command Reference for x930 Series 1371
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
BGP AND BGP4+ COMMANDS
SHOW
BGP IPV6 (BGP4+ ONLY)
show bgp ipv6 (BGP4+ only)
Overview Use this command to display BGP4+ network information for a specified IPv6
address.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Syntax
show bgp ipv6 <ipv6-addr>
Mode User Exec and Privileged Exec
Example
awplus# show bgp ipv6 2001:0db8:010d::1
Related
Commands
show bgp ipv6 longer-prefixes (BGP4+ only)
Parameter Description
<ipv6-addr> Specifies the IPv6 address, entered in hexadecimal in the format
X:X::X:X.
To Next Page
Loading...
Need help?
General
