C613-50100-01 REV C Command Reference for x930 Series 1407
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
BGP AND BGP4+ COMMANDS
SHOW
IP BGP NEIGHBORS CONNECTION-RETRYTIME (BGP ONLY)
show ip bgp neighbors
connection-retrytime (BGP only)
Overview Use this command to display the configured connection-retrytime value of the
peer at the session establishment time with the neighbor.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Syntax
show ip bgp neighbors <ipv4-addr> connection-retrytime
Mode User Exec and Privileged Exec
Example
awplus# show ip bgp neighbors 10.11.4.26 connection-retrytime
Parameter Description
<ipv4-addr> The IPv4 address of an IPv4 BGP neighbor, in dotted decimal
notation A.B.C.D.
To Next Page
Loading...
Need help?
General
