55
C613-50100-01 REV C Command Reference for x930 Series 2693
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Dynamic Host
Configuration
Protocol (DHCP)
Commands
Introduction
Overview This chapter provides an alphabetical reference for commands used to configure
DHCP.
For more information, see the DHCP Feature Overview and Configuration Guide,
which is available at the above link on alliedtelesis.com.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide. This guide is
available at the above link on alliedtelesis.com.
Command List •“bootfile” on page 2695
•“clear ip dhcp binding” on page 2696
•“default-router” on page 2697
•“dns-server” on page 2698
•“domain-name” on page 2699
•“host (DHCP)” on page 2700
•“ip address dhcp” on page 2701
•“ip dhcp bootp ignore” on page 2703
•“ip dhcp leasequery enable” on page 2704
•“ip dhcp option” on page 2705
•“ip dhcp pool” on page 2707
•“ip dhcp-relay agent-option” on page 2708
•“ip dhcp-relay agent-option checking” on page 2710
•“ip dhcp-relay agent-option remote-id” on page 2711
•“ip dhcp-relay information policy” on page 2712
•“ip dhcp-relay maxhops” on page 2714
To Next Page
Loading...
Need help?
General
