C613-50100-01 REV C Command Reference for x930 Series 293
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
SYSTEM CONFIGURATION AND MONITORING COMMANDS
SHOW
SYSTEM PCI DEVICE
show system pci device
Overview Use this command to display the PCI devices on your device.
Syntax
show system pci device
Mode User Exec and Privileged Exec
Example To display information about the PCI devices on your device, use the command:
awplus# show system pci device
Output Figure 7-23: Example output from the show system pci device command
Related
Commands
show system environment
show system pci tree
awplus#show system pci device
00:0c.0 Class 0200: 11ab:00d1 (rev 01)
Flags: bus master, 66Mhz, medium devsel, latency 128, IRQ 113
Memory at 5ffff000 (32-bit, non-prefetchable) [size=4K]
Memory at 58000000 (32-bit, non-prefetchable) [size=64M]
00:0d.0 Class 0200: 11ab:00d1 (rev 01)
Flags: bus master, 66Mhz, medium devsel, latency 128, IRQ 116
Memory at 57fff000 (32-bit, non-prefetchable) [size=4K]
Memory at 50000000 (32-bit, non-prefetchable) [size=64M]
To Next Page
Loading...
Need help?
General
