C613-50100-01 REV C Command Reference for x930 Series 911
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
RIP COMMANDS
SHOW
DEBUGGING RIP
show debugging rip
Overview Use this command to display the RIP debugging status for these debugging
options: nsm debugging, RIP event debugging, RIP packet debugging and RIP nsm
debugging.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Syntax
show debugging rip
Mode User Exec and Privileged Exec
Usage Use this command to display the debug status of RIP.
Example
awplus# show debugging rip
To Next Page
Loading...
Need help?
General
